wheelz
; )
description
Set Big Wheel for the front axle.
Complete with axle screws and steering angle stop.
If your Ciro model has 2 bores for the axle screw per steering bracket (standard since 2010) you can mount the axle screws in the rear bores too. So the Ciro is lowered as if 101mm wheelz were mounted and the straight running stability will be improved due to the increased caster.
Information:
If you want to mount the Big Wheelz 145 at a front axle with a flexible steering rod,
you better should retrofit a steering reset system.
In the Ciro Shop you will find suitable kits, here e.g. for models from 2009 on:
steering reset bottom.
If there is a model with 2 bores for the axle screw per steering bracket (standard since 2010) you should mount the axle screws in the rear bores. So the straight running stability will be improved due to the increased caster.
| wheel: | polyurethane, grey-translucent |
| core: | black |
| decals: | none |
| wheel dia: | 145mm |
| wheel width: | 30mm |
| bearing width: | 34mm |
| bearings: | ABEC 5 |
| spacer: | 20mm or 2x10mm |
Set of 2 Big Wheelz with bearings and spacer, axle and steering angle stop screws.
Safety note:
The steering angle stop screws prevent the wheelz from touching the head plates.
If not mounted the wheelz may get blocked at full steering angle.
The steering angle stop screws are to be mounted instead of the black plastic rivets in the head brackets. See arrow at the right image below.
More images for this product
;)
;)
;)
;){kind=link}