wheelz
Price: 51,00 € incl. VAT plus Delivery
Set Boa Constrictor Wheel 100mm, rear axle ................... !NEW! ........................ with bearings, 1 pce
Product number.: 533.023R
description
The brand new 100mm Boa Constrictor series wheels feature a new urethane mix. The wheel is designed for speed and and longer reach per step by less energy input. When It is dry this wheel will destroy everything in its path. But when it is wet, precaution is recommended, due to their cylindrical shape. The inside edge has a sharp lip for more grip. This wheel has an excellent resilience against nasty chunks paired with shock-absorbing properties and with high rebound. With a hardness of only 76 Shore A is balances speed and comfort at best.
The set contains wheel, axle screw, all spacer and washers.
Does not fit to models with rear suspension and /or disc brake!
wheel: | Polyurethan, yellow |
core: | offset, black |
printing: | outside only |
wheel dia: | 100mm |
wheel width: | 65mm |
bearing width: | 24mm |
spacer: | 10mm |
weight: | ca. 451 g per piece, bearings and spacer included) (w/o axle screw and small parts) |
mount on 90mm rear axle: | 1x little washer 8mm under screw head and nut each |
between fork and wheel, printed side: |
2x little washer 8mm + 1x spacer 17,5 and 1x 6,5mm |
between wheel and fork, opposite side: |
2x spacer 6,5mm + 2x little washer 8mm |
1 pce with spacer and bearings, 90mm axle screw and all small parts needed
TIP:
If the width between the forks is too small, unscrew the rear screws of the forks as long as the bundle of washers, spacer and wheel fits. After assembly fasten the axle nut and fork screws tight.
Otherwise unscrew the fork on the nut side completely, put the 90mm axle screw through the fixed fork and stack all small parts, the wheel and the fork onto the screw (order as described above). Then tighten the screws of the fork and the axle screw well.